18
Getting Started
1. Press the 4 or 6 keys to move through the selection.
2. Press the 8 or 2 keys to change the value for the date and time.
3. Press the OK button to apply.
4. If necessary, press the Menu button to close the menu.
Now, you are ready to start taking images and videos.
NOTE
• Holding down the 8 or 2 keys changes the values continuously.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
Your camera has three modes.
Photo mode
• Slide the Mode switch to [r] to capture images.
Movie mode
• Slide the Mode switch to [ ] to record videos.
Playback mode
• Slide the Mode switch to [p] to view and edit captured images or playback
videos.
Setting the Date & Time
Modes
To Next Page
Loading...
Need help?
General
