42
Recording Images and Videos
The table below shows the available Digital Zoom settings.
NOTE
• Digital Zoom is not available in Face Tracking on and Movie modes.
• The maximum intellect zoom scale varies depending on the image type and
resolution.
The date of recording can be printed directly on the still images. This function must be
activated before the image is captured. Once date and time are stamped on an
image, they can no longer be edited or deleted.
Limitations of Date Stamp functions are as follows.
• Available for still images only.
• May slow down AEB/Burst mode when Date Stamp is enabled in AEB/Burst mode.
• In vertical or rotated images, the date and time on your images still appear
horizontally.
To set Date Stamp
1. From the Record menu, select Date Stamp.
2. Use the 8 or 2 keys to go through the selection.
3. Press the OK button to save and apply changes.
Icon Item Description
Intelligent
Zoom
Enlarges the image digitally with almost no distortion.
This feature is available for still images only.
Standard
Zoom
Enlarges all image sizes up to a maximum of 5x in
preview, but the image quality deteriorates.
Off Uses the optical zoom only.
Setting the Date Stamp
To Next Page
Loading...
Need help?
General
