64
Using the Setup Menu
This function allows you to select a method to assign file numbers to images.
Available settings are:
• Series: Assigns numbers to files in sequence even if the folder is changed.
• Reset: The file numbering will start from 0001 each time a folder is changed or the
memory is formatted.
To understand folder and file structure of your camera, see “About Folder and File
Names” on page 80.
Use the TV Out function to adjust video output signal to accommodate different
regional settings. If TV out is not set correctly, the image may not display properly on
TV.
Available settings are:
• NTSC: Applicable in USA, Canada, and others.
• PAL: Applicable in Europe, Asia (excluding Taiwan), Oceania and others.
This utility formats the internal memory (or memory card) and erases all stored
images and data.
Available settings are:
• Format: Select to format currently used memory.
• Copy to Card: Select to copy all files stored in the internal memory to the memory
card.
NOTE
• If images were saved to internal memory before inserting a memory card into the
camera, you can use Copy to Card function to copy all images from the internal
memory to the memory card.
• If a memory card has not been inserted into the camera or the memory card is
locked or the internal memory is empty, Copy to Card function is not available.
Setting File Numbering
Setting TV Out
Setting Memory Kit
To Next Page
Loading...
Need help?
General
