63
Using the Setup Menu
The Power Save function allows you to set an idle time after which the camera
automatically sets to sleep mode to save power. After a minute of being in sleep
mode, the camera eventually turns off power.
This function is not available in the following instances:
• Recording a video file
• Playing a slide show/video file
• Using the USB connector
Enable the LCD Save function to automatically decrease the LCD brightness to
conserve battery power. When the camera is idle for 20 seconds, the LCD darkens.
Press any button to resume to normal brightness.
• The camera is idle when no buttons are pressed. LCD Save, though enabled, does
not function during video playback, slide show and video recording.
Use the Date & Time function to set the date and time of your camera. This function is
useful in attaching date stamps on captured images. Your camera uses a 24-hour
time format.
1. Press the navigation controls to adjust date and time value. By holding down
the 2 or 8 keys, the numeric values changes continuously.
2. Press the OK button to apply changes.
Specify in which language menus and messages are to be displayed on the LCD
monitor.
1. Use the navigation control to scroll through the list and select the desired
language.
2. Press the OK button to confirm and apply settings.
Setting Power Save
Setting LCD Save
Setting Date & Time
Setting Language
To Next Page
Loading...
Need help?
General
