26
Recording Images and Videos
When taking pictures in difficult lighting conditions, use the Flash/Right button to get
correct exposure. This function cannot be activated in recording videos or continuous
shooting.
To activate Flash:
• Press the Flash/Right button on your camera
repeatedly until your desired Flash mode is
displayed on the LCD monitor.
Your camera is equipped with five flash modes.
NOTE
• Flash function is only available in shooting still images but not available in Burst
and AEB modes.
• Do not charge the flash while pressing the Zoom button. Charge the flash after
releasing the Zoom button if necessary.
Using Flash
AUTO. The flash fires automatically whenever
extra lighting is needed.
Red-eye reduction. The flash fires twice to reduce
the red-eye effect.
Forced on. The flash fires whenever you press the
Shutter button regardless of lighting conditions.
Slow sync. The flash fires with a slow shutter
speed.
Forced off. The flash is turned off.
Flash/Right
button
Auto flash is enabled.
To Next Page
Loading...
Need help?
General
