Casio TE-2400 - CF-CARD CLEAR Test; CF-CARD READ ONLY Test; N113

— 35 —
[ 6 ] CF-CARD READ ONLY test
[Function]
This test will check the read only test for CF-CARD.
Perform the CF-CARD write test, before start of this test.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : 0 n 1 1 3 SUBTOTAL
n : 0 = One time check(can be omitted)
not 0 = Continuous check( To stop the test, press ”C” key or turn off the power by rotating
the key.)
[PRINT]
NG and the address are printed if READ cannot be done
normally.
CF - CARD 113
CF RD OK
END 11 3
[ 7 ] CF-CARD CLEAR test
[Function]
This test will check the clear test for CF-CARD.
Note that this test does not ensure the data inside the CF-CARD as well as its performance.
[Operation]
Operation : 0 n 2 1 3 SUBTOTAL
n : 0 = One time check (can be omitted)
not 0 = Continuous check (To stop the test, press “C” key or turn off the power by rotating
the key.)
[PRINT]
NG and the address are printed if WRITE cannot be done
normally.
CF - CARD 213
CF CLR OK
END 21 3