33
4. To edit the selected method, refer to instructions in the Create Method and the Edit Method sections of this
manual for entering method parameters. Once the name and/or parameters are edited as desired, select the disk
icon at the top of the screen to save the edited method.
CAUTION
When a method is edited and saved, the original method is no longer available in the instrument memory.
Review Method Information
1. From the MARS 6 home screen, select “Classic Methods” or “One Touch Methods.”
One Touch Methods
2. Scroll through the methods until the desired method is visible. Touch and hold (long touch) the method to be
reviewed.
3. Select the “Information” icon at the top of the screen.
To Next Page
Loading...
