61
62. If the time displayed on the screen is incorrect, select “Time.”
63. Scroll through the hour, minute and AM or PM and select the appropriate time.
64. Select “OK.”
65. Once the date and time are properly displayed, select the disk icon at the top of the screen. Once the date and
time are saved, the disk icon will be grayed out.
66. Select “Users.”
67. Note: If the auto login is turned on, the first screen shown below will appear. If the auto login is turned off, the
second screen below will appear. Only the Administrator can change the “Auto Login” to on or off.
CAUTION
Do Not turn “Auto Login” off unless a password is to be required to activate the system operating software.
To Next Page
Loading...
