48
8. Install a USB flash drive in one of the USB ports.
9. Select “Export” from the Screen Context Menu to export the selected methods to the USB flash drive.
10. If a USB flash drive is not installed, the following screen will appear.
Note: TempGuard™ value exports with the method.
DeleteSingle/ Multiple Methods
11. Follow steps 1 through 10 above.
12. Select the “X” (delete icon) at the top of the screen to delete the method(s). To export the method(s), follow steps
8 through 10 above.
Print Method Data
1. Refer to the “Settings/Run” section of this manual to select the items to be included in the printed data report.
2. From the “Home Screen” select either “One Touch” or “Classic” methods.
3. Select the method (touch and hold the icon) to be used for the data report.
To Next Page
Loading...
