87
Update Firmware
The MARS 6 firmware should be updated when a revised version is released. The firmware can be obtained from
CEM’s website www.cem.com. One user should be responsible for updating the firmware.
1. Create a CEM user account. If a CEM user account has been created previously, proceed with step 2.
a. Access the CEM website www.com.com.
b. Locate “Signup” in the blue bar located at the top of the screen.
c. Providethe applicable customer and product information. The product tag is located on the serial tag on
the left side panel of the instrument.
d. Once all information has been entered, select “Register.”
NOTE: If the product tag cannot be located, contact the CEM Corporation Synthesis Department at 800-726-3331
or 704-821-7015.
2. Log into the CEM website www.cem.com.
3. Select the applicable instrument model from the “Products” menu.
4. Select “Resource Library.” Scroll down to the “Software Updates” section. The most current version of
firmware will be available for download.
5. Using a computer, create a folder titled “CEM” on the USB flash drive.
CAUTION
Only the USB flash drive supplied with the Discover SP is compatible with the instrument software.
6. Copy the supplied firmware file into the “CEM” folder created on the USB flash drive.
NOTE: Firmware files will follow the “Evolution_XX.XX” format.
7. Turn the instrument off.
8. Install the USB flash drive containing the latest Mars 6 firmware into a USB port on the side of the
instrument.
To Next Page
Loading...
Need help?
General
