EasyManuals Logo

CEM MARS 6 User Manual

CEM MARS 6
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
37
3. Scroll through the methods until the desired method is visible. Select the method to be performed.
WARNING
Because cardiac pacemakers require magnets to control operation during checkout, if the MARS is
equipped with a sample stirrer, some danger exists if a pacemaker is positioned in close proximity to the
instrument cavity. If the instrument is suspected of interfering with the operation of a pacemaker, the
instrument should be turned off or the pacemaker wearer should move away from the instrument.
4. Install the turntable into the instrument, ensuring that the flat edge on the bottom of the turntable
corresponds with the flat edge of the turntable lug. Note: The vessels can be installed into the turntable
prior to turntable installation into the instrument cavity.
5. If using temperature and/or pressure control, ensure that the appropriate sensors are installed in the
control vessel prior to placing the control vessel into the MARS 6 cavity.

Other manuals for CEM MARS 6

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CEM MARS 6 and is the answer not in the manual?

CEM MARS 6 Specifications

General IconGeneral
TypeMicrowave Digestion System
Power Output1600 W
Temperature ControlYes
Pressure ControlYes
Vessel Capacityup to 40 vessels
DisplayTouchscreen
Operating Pressureup to 800 psi
Temperature Rangeup to 300°C
Temperature Accuracy± 1 °C
Power Supply220-240 V, 50/60 Hz
Safety FeaturesOver-temperature and over-pressure protection
Power Consumption1600W
Cooling RateForced air cooling

Related product manuals