68
102. The method of printing data can be selected by turning “Graph,” “Data,” and/or “Report” “On” or “Off.”
103. Once the method of printing is selected, select “Save.”
104. Scroll the “Run” screen upward to display the selections for “Data Report.”
105. Select “On” or “Off” for the items to be included in the data report – “Temperature,” “Sample ID,” “Description,”
“Reagents,” “Mass,” and “Volume.”
106. Once the items to be included in the data report are selected, select the disk icon at the top of the screen. When
the data report selections are saved, the disk icon will be grayed out.
To Next Page
Loading...
