CEM MARS 6 User Manual

74
135. Using the keyboard, enter the temperature of the fiber optic probe measured and recorded in step 126.
136. Place a thermometer in the beaker of water to measure the temperature of the water. Record the measured
temperature on the thermometer.
137. Select the “Reference Temperature.”
138. Using the keyboard, enter the temperature of the fiber optic probe measured and recorded.
139. Select “On” or “Off” for the ReactiGuard.
Note: ReactiGuard detects and alerts the user to an event in a vessel.
140. Scroll the Sensor setting screen to reveal additional information.

CEM MARS 6 Specifications

General

Type	Microwave Digestion System
Power Output	1600 W
Temperature Control	Yes
Pressure Control	Yes
Vessel Capacity	up to 40 vessels
Display	Touchscreen
Operating Pressure	up to 800 psi
Temperature Range	up to 300°C
Temperature Accuracy	± 1 °C
Power Supply	220-240 V, 50/60 Hz
Safety Features	Over-temperature and over-pressure protection
Power Consumption	1600W
Cooling Rate	Forced air cooling