To Next Page

To Previous Page

24 User’s manual

5. lIfTInG/HanDlInG

In order to remove the machine from the pallet,

hook it as shown in  gure 7.

This lifting point must be used whenever you

need to change the position of the machine. Do

not attempt to move the machine until it has been

disconnected from the power and pneumatic

supply networks.

5.1 INSTALLATION AREA

WARNING

Installthemachineincompliancewithalltheapplicablesafetystandards,in-

cluding,butnotlimitedto,thoseissuedbyOSHA.

CAUTION

IMPORTANT:forthecorrectandsafeoperationoftheequipment,theambientlighting

levelshouldbeatleast300lux.

CAUTION

IMPORTANT:Donotinstallthemachineoutdoors.Itisdesignedtobeusedinclosed,

coveredareas.

DANGER

RISKOFEXPLOSIONORFIRE.Donotusethemachineinareasthatcouldbe

exposedtoinammablevapours(petrol,paintsolvents,etc.).

Donotinstallthemachineinanarrowareaorpositionitbelowoorlevel.

CEMB SM628TI User Manual

Questions and Answers: