CEMB SM628TI User Manual

CEMB S.p.A.
Via Risorgimento, 9 – 23826 Mandello del Lario (LC) ITALY
Telefono: + 39 0341 706369 Fax: + 39 0341 700725 www.cemb.com - garage@cemb.com
Cemb Spa declines all liability for any damage to people or property caused by incorrect use of this product.
Subject to change without prior notice.
U
S
A
SM628TI
User’s manual
Manuel d’utilisation
Manual de uso
EN
FR
ES

CEMB SM628TI Specifications

General

Category	Tyre Changers
Manufacturer	CEMB
Model	SM628TI
Operating pressure	8-10 bar
Motor power	0.75 kW
Voltage	400V

Summary

1. Commissioning

1.1 Introduction

Provides an overview of the manual's purpose, scope, and target audience for optimal machine operation.

1.2 For Your Safety

Details hazard identification symbols and general warnings essential for safe operation and accident prevention.

1.2.a. General Warnings and Instructions

1.2.b. Labels Placement

1.2.c. Hazard Labels Key

1.2.d. Electrical and Pneumatic Connections

1.2.e Technical Data

1.2.f. Air Pressure

1.3. Additional Rim/Tyre Information

1.4. Intended Machine Use

1.5. Personnel Training

1.6. Preliminary Checks

1.7. During Use

1.8. Optional Accessories

2. Transport, Storage and Handling

Machine Transport and Storage Conditions

Details requirements for transporting and storing the tyre changer, including dimensions, weight, and ambient conditions.

Handling the Machine

Provides instructions on how to safely move the packaged machine using a forklift.

3. Unwrapping

4. Mounting

5. Lifting/Handling

5.1 Installation Area

Specifies requirements for the installation area, including safety standards, lighting, and environmental conditions.

6. Description of the Machine

6.1. Operator Position

Illustrates operator positions and hazardous areas during different work phases like bead breaking and inflation.

7. Overall Dimensions (mm)

8. Main Working Elements of the Machine

8.1 Commands

Identifies and explains the function of the machine's main controls, including pedals and gauges.

9. Basic Procedures - Use

Risk of Crushing and Impact

Warns about potential crushing and impact hazards from moving machine parts and advises keeping clear.

Preventing Physical Damage

Provides steps to safely prepare the machine for maintenance by disconnecting power and air supplies.

9.1. Preliminary Checks

Guides on checking air pressure, electrical, and pneumatic connections before operating the machine.

9.2. Deciding from Which Side of the Wheel the Tyre Must Be Removed

Explains how to identify the correct wheel orientation for mounting/demounting based on rim channel and curvature.

9.3. Bead Breaking

Details the procedure for breaking the tire bead from the rim, including pedal operation and blade adjustment.

9.4. Clamping the Wheel

Explains how to securely clamp the wheel onto the turntable using the locking wedges, considering rim types.

9.5. Wheel Demounting

Outlines the steps for lifting the bead with a tool and using the turntable pedal to demount the tire.

Mounting Head Quick Change & Tool Head Positioning

Describes the quick change device and correct tool head positioning for effective wheel demounting.

9.6. Wheel Mounting

Provides instructions for mounting tires onto rims, emphasizing compatibility checks and bead lubrication.

9.7. Tyre Inflation

Lists safety warnings for inflation and details the process, including wheel clamping and pressure monitoring.

Special Procedure (TI Version)

Explains the special procedure for bead insertion and inflation of Tubeless tires using air jets.

10. Troubleshooting

11. Maintenance

12. Scrapping

13. Environmental Information

14. Information and Warnings About Oil

15. Firefighting Equipment to Be Used

16. Glossary

17. General Wiring Diagram

18. Pneumatic System Diagram