CEMB SM628TI - 9.7. Tyre Inflation

38 User’s manual
- Once you have mounted the rst bead, repeat the same steps for the second bead
(g.27).
- Move the operating arms to the “non-wor-
king” position.
- Release the wheel and remove it from the
tyre changer.
Specialtools
To make it easier to mount/demount low prole
tyres, it is advised to use the beadpressergrip-
per(optional accessory supplied on request).
9.7. TYRE INFLATION
9.7.a.SafetyIndications
DANGER
•RISKOFEXPLOSION
•Neverexceedtyrepressurerecommendedbytyre
manufacturer.
•Alwaysmatchthetyreandrimdimensions.
•Takecaretoavoidanydamagetothetyre.
•Duringinflation,keepoutsidetheverticalcylinder
areaoccupiedbythewheel.
26
D
27