CEMB SM628TI - Page 33

User’s manual 33
EN
WARNING
Duringthebeadbreakingoperation,youare
advisedtokeeptheturntableclosed(locking
wedgestowardsthecentre)
16
C
- Press the pedal (g.16) to operate
the bead breaker and detach the bead from the
rim. Repeat this operation on the other side of
the wheel. It may be necessary to break the
bead at several points to free it completely.
Release the pedal to reverse the motion of
the bead breaking shoe.
After detaching the beads, remove the old
balancing weights.
- Thoroughly lubricate the sides of the tyre around
the entire circumference of the lower and upper bead to facilitate demounting and avoid
damaging the beads (g.17).
WARNING
Actingontheturntablepedal(Cg.16)closestheclampsandmaybedange-
rous(dangerofhandcrushing).Duringrimclamping,donotkeepthehands
underthetyre.
17