Centa CENTAX-L - Page 19

Assembly and operating instructions
CENTAX-L
016L-00050…00090-FS10
M016-00003-EN
Rev. 3
CENTA Antriebe Kirschey GmbH 19 / 46
CAUTION
Material damage to coupling components can occur as a result
of:
 Anaerobic adhesives (e.g. Loctite) used for screw locking
This type of screw locking medium may not be in contact with rubber
parts.
IMPORTANT
 Screw preparation and tightening torque levels in accordance with
CENTA data sheet D013-013 (see chapter 11.1).
 Use suitable lifting devices for assembly.
 The following assembly stages are described for coupling 016L-00064-FS10.
 Part illustration and marking may different slightly from installation drawing and
delivery state.