Centa CENTAX-L - Pictograms; Qualification of Deployed Personnel; Intended Application

Assembly and operating instructions
CENTAX-L
016L-00050…00090-FS10
M016-00003-EN
Rev. 3
CENTA Antriebe Kirschey GmbH 7 / 46
2.1.2 Pictograms
Possible pictograms in the safety precautions:
Warning of a hazardous area
Do not switch
Use protective gloves
Use protective goggles
2.2 Qualification of deployed personnel
All the work described in these operating instructions may only be performed by
authorized persons with adequate training and instruction.
WARNING
Injury and material damage can occur as a result of:
 Work at the coupling which is not described in these instructions
Only carry out work which is described in these operating instructions.
2.3 Intended application
WARNING
Injury and material damage can occur as a result of:
 Application not in compliance with the intended use
The couplings are intended exclusively for use in accordance with the
relevant design. They may only be used under the specified conditions.