Centa CENTAX-L - Table of Contents

Assembly and operating instructions
CENTAX-L
016L-00050…00090-FS10
M016-00003-EN
Rev. 3
CENTA Antriebe Kirschey GmbH 2 / 46
Contents
1 General remarks ..................................................................................... 5
2 Safety ..................................................................................................... 6
2.1 Safety remarks .................................................................................. 6
2.1.1 Signal words ......................................................................... 6
2.1.2 Pictograms ............................................................................ 7
2.2 Qualification of deployed personnel ...................................................... 7
2.3 Intended application ........................................................................... 7
2.4 Application not in compliance with the intended use ............................... 9
3 Delivery, transport, storage and disposal ............................................. 10
3.1 Delivery ...........................................................................................10
3.2 Transport .........................................................................................10
3.3 Storage ...........................................................................................10
3.3.1 Storage location ....................................................................11
3.3.2 Storage of couplings / flexible elements ...................................11
3.4 Disposal...........................................................................................11
4 Technical description ............................................................................ 12
4.1 Characteristics ..................................................................................12
4.2 Specifications ...................................................................................12
5 Alignment of the units being connected ................................................ 13
5.1 Axial alignment .................................................................................13
5.2 Radial alignment ...............................................................................14
5.3 Angular alignment.............................................................................16
6 Mounting .............................................................................................. 18
6.1 General assembly instructions ............................................................18
6.2 Mounting overview ............................................................................20
6.3 Mounting the hub ..............................................................................22
6.3.1 Mounting the hub with cylindrical bore and keyway ...................22
6.3.2 Mounting the hub with conical oil interference fit .......................24
6.4 Aligning the units ..............................................................................26
6.5 Positioning the link flange assembly (1) ...............................................27
6.6 Mounting the link flange assembly (1) .................................................28
6.6.1 Mounting the link flange assembly with/without sheet (5) ..........28
6.6.2 Mounting the link flange assembly and the adapter (8) ..............30
6.7 Mounting the links ............................................................................32
6.8 After completed mounting ..................................................................36
7 Operation.............................................................................................. 37
7.1 Operating faults, root causes and remedy ............................................37
7.2 Admissible overall misalignment of the coupling ...................................37