Centa CENTAX-L - Page 3

Assembly and operating instructions
CENTAX-L
016L-00050…00090-FS10
M016-00003-EN
Rev. 3
CENTA Antriebe Kirschey GmbH 3 / 46
8 Care and maintenance .......................................................................... 38
8.1 Work to be performed .......................................................................38
8.1.1 Cleaning the coupling ............................................................38
8.1.2 Visual inspection of the coupling .............................................38
8.1.3 Visual inspection of links ........................................................38
8.1.4 Visual inspection of the rubber elements / rubber segments .......39
8.1.5 Inspection of the screw connections ........................................39
8.2 Replacing defective parts ...................................................................39
9 Dismantling .......................................................................................... 40
9.1 General dismantling instructions .........................................................40
9.2 Dismantling the links .........................................................................41
9.3 Dismantling the link flange assembly ...................................................41
9.3.1 Dismantling the link flange assembly with/without sheet (5) ......41
9.3.2 Dismantling the link flange assembly and the adapter (8) ..........41
9.4 Dismantling the hub (if necessary) .....................................................42
9.4.1 Dismantling the hub with cylindrical bore and keyway ...............42
9.4.2 Dismantling the hub with conical oil interference fit ...................42
9.5 Reassembling the coupling .................................................................43
10 Wearing and spare parts....................................................................... 44
11 Annex ................................................................................................... 45
11.1 CENTA data sheet D013-013 (lubricated screw connections) ..................45
11.2 CENTA data sheet D016-900 Declaration of incorporation according to
the EC Machinery Directive 2006/42/EC, Appendix II B ..........................46