Example: The locking device is in block mode. You delete the Block-Master from of the locking
device. After deletion, the locking device will still be in block mode.
10.1.1.1 Deleting all master media from a locking device
1. Remove the System-Master from the reading field of the locking device (see "Deleting
System-Master" on page115).
By deleting the System-Master all master media authorisations are deleted from this locking
device. The locking device automatically reverts back to the normal mode, if it was in a different
mode (e.g. block mode).
10.1.1.2 Deleting individual master media from locking devices using OMEGA Client soft-
ware.
1. Delete the master media from the OMEGA Client software (see "Deleting master media" on
page113).
2. Carry out a new programming of the desired locking devices.
The master media is now deleted from all newly programmed locking devices.
Note that the programming jobs are transmitted automatically only to the locking devices
in the online mode. You must transmit the programming jobs to the offline locking devices
individually with an RF-Stick.
10.2 Loss of a locking media
If a locking media has been lost, then depending on the operating mode (Line or V-NET), you can
restore the security of your OMEGA FLEX system in various ways, For procuring new locking
media, please contact your CES partner.
10.2.1 Loss of a locking media for administration via master media
If you are administering your OMEGA FLEX system exclusively with master media, then in case of
loss of a locking media you must delete at each locking device all locking authorisations, because
without the OMEGA Client software you cannot delete locking authorisations individually, if you
do not have the corresponding locking media any more.
There are two ways to delete the locking media authorisations from a locking device:
1) You delete all locking media authorisations using the Program-Master (see "Deleting all
locking media authorisations simultaneously" on page120)
Page 102 of 141 Long shield ILS
10.2 Loss of a locking media
Overview: Master media usage
Help & troubleshooting
Technical data Maintenance & disposal Operation Administration Assembly Basics
To Next Page
Loading...
