11.15 Activating online mode
The online mode can only be activated for variant NET and VA locking devices (see "Variants
of OMEGA FLEX locking devices" on page9).
Required master media:
l RF-Ini-Master
For the activation of online mode it is not necessary to authorise the RF-Ini-Master in
advance.
Procedure:
1. Hold the RF-Ini-Master for ca 1 second in the reading field of the locking device.
Following signals appear:
A: 1x short green
= successfully connected to the Access-Point
B: 1x long red
= no connection to the Access-Point possible
C: 1x long green
= Connection to the Access-Point existed already
2. Remove the RF-Ini-Master from the reading field.
The online mode is now deactivated.
Page 128 of 141 Long shield ILS
11.15 Activating online mode
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation Administration Assembly Basics
To Next Page
Loading...
