11.6 Deleting locking media authorisations
If you are administering your OMEGA FLEX system exclusively with master media, you can
only delete individually authorised locking media if you own the corresponding Locking
media. If the locking media no longer exists, you must delete the authorisations for all
locking media, see "Loss of a locking media" on page102
A locking media can be deleted from a locking device only with the same Program-Master
with which it was authorised.
Required media:
l Program-Master with which the locking media was authorised
l Authorised locking media, whose authorisation is to be deleted.
Procedure:
1. Hold the Program-Master for ca 1 second in the reading field of the locking device to start
the “delete locking media” mode.
The following signal appears:
1x short green
Page 118 of 141 Long shield ILS
11.6 Deleting locking media authorisations
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation Administration Assembly Basics
To Next Page
Loading...
