11.7 Deleting all locking media authorisations simultaneously
Only those locking media authorisations are deleted, which were added by the same
Program-Master, which is also used for deletion.
This step by step instruction shows how to delete all locking media authorisations, the
Program-Master itself however remains stored in the locking device. As an alternative, you
can also delete the Program-Master from the locking device, this also deletes all locking
media authorisations which were added by this Program-Master (see "Deleting master
media" on page113
Procedure:
1. Hold the Program-Master before the reading field of the locking device.
After ca. 5 second, the following signal appears:
2x short green
1. Remove the Program-Master from the reading field of the locking device.
All locking media authorisations from this locking device are now deleted, which were added with
this Program-Master.
Page 120 of 141 Long shield ILS
11.7 Deleting all locking media authorisations simultaneously
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation Administration Assembly Basics
To Next Page
Loading...
