EasyManua.ls Logo

CEStronics CES OMEGA FLEX - 5 Administration; OMEGA FLEX System Administration Basics

CEStronics CES OMEGA FLEX
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Administration
NOTICE
Inadvertent state of your system possible
If you are not fully aware of the capabilities of your system, it may execute
unexpected functions.
- If you are administrating a OMEGA FLEX system, you must be well aware
of the consequences of programming and settings. Otherwise,
unexpected results are possible.
- Always confirm that your programming will achieve the desired results.
5.1 OMEGA FLEXsystem administration basics
5.1.1 System families
The family of systems is the top most differentiating level for the OMEGA FLEX systems. It
specifies which transponder technology (LEGIC or MIFARE) is used in the system:
l OMEGA FLEX MIFARE
l OMEGA FLEX LEGIC
5.1.2 Operating modes: LINE vs V-NET (only MIFARE)
The operating mode specifies, where the locking media authorisations are stored. There are two
operating modes for the OMEGAFLEX MIFARE systems:
l LINE: Authorisations are stored in the locking device
l V-NET: Authorisations are stored in the locking media
5.1.3 Types of administrations (only MIFARE)
Within the two operating modes LINE and V-NET different administration types are possible:
Long shield ILS Page 61 of 141
5.1 OMEGA FLEXsystem administration basics
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation
Administration
Assembly Basics

Table of Contents

Other manuals for CEStronics CES OMEGA FLEX