11.18 Transmitting programming jobs using RF-Stick to a locking
device
Required master media and administration devices:
l RF-Stick-Master
l RF-Stick
l PC with OMEGA Client installed
The RF-Stick-Master must first be authorised for all locking devices on which it is to be used
(see "Authorising additional master media" on page111). Each RF-Stick-Master that has
been authorised once is compatible with every RF-Stick of a OMEGA FLEX system.
Procedure for creating programming jobs:
1. Start the OMEGA Client and log in with your user name and password.
2. Set the desired changes in the OMEGA Client.
3. Start your changes accordingly as a change programming or new programming, e.g.
through PROGRAMMING > PROGRAM ALL CHANGES.
The status display of the OMEGA Client shows now "programming required". The individual
programming jobs are shown under “Programming status”.
Long shield ILS Page133 of 141
11.18 Transmitting programming jobs using RF-Stick to a locking device
Overview: Master media usage
Help & troubleshooting
Technical data
Maintenance & disposal Operation Administration Assembly Basics
To Next Page
Loading...
