CEStronics CES OMEGA FLEX - Assembly Option S (for Short Shield Holes)

4.6 Assembly Option S (for Short shield holes)
The Long shield ILS - Option S is suitable for utilising the existing short shield holes for assembly.
4.6.1 Scope of delivery - Long shield ILS Option S
1 1 Outside fitting, pre-assembled with outside lever handle, coupling module and e-module
2 1 Assembly plate, pre-assembled with inside lever handle
3 1 Inside shield
4 1 Fixture ring
5 1 Square spindle
6 3 Washers (for fixing screws)
7 3 Locking nuts (for fixing screws)
8 2 Fixing screws without cable slit (with fixing rings)
9 1 Fixing screw with cable slit (with fixing ring)
10 2 Batteries Energizer Ultimate Lithium 1,5V AA
11 1 Battery module
12 1 Support frame
13 1 Spring clip (only for handle sets without a PZ hole)
14 1 Installation tube
Page 34 of 141 Long shield ILS
4.6 Assembly Option S (for Short shield holes)
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration
Assembly
Basics