Signalling Reason Solution
be read (No sig-
nal).
device.
The reading field is shielded by metallic
materials.
Remove the metallic materials from the
reading field of the locking device.
Shortly before, another authorised locking
media was held in the reading field of
the locking device and the opening
period of the locking device has not yet
expired.
You can open the door without having to
have your locking media read.
The battery is empty. Replace the batteries (see "Maintenance"
on page91).
b) The locking media is defective. Have a new locking media issued by the
administrator of the OMEGA FLEX system.
The locking media is not authorised. Have the locking media authorised by the
administrator of the OMEGA FLEX system.
The locking media is authorised but the
block time or block mode is active.
If the block time or block mode is active, a
locking device cannot be opened by an
authorised locking media.
The locking media is authorised and the
locking device is currently in release
mode.
You can open the door also without an
authorised locking media.
6.2 Using the Office function
In order to use the office function, the administrator must first set it up with the OMEGA
Client software (see "Office-function" on page67).
The office function in locking media can put locking devices into office mode. In the office mode,
locking devices are released for a certain period of time, i.e.during this time, the door can be
opened even without the locking media. After expiry of the time period, the locking device reverts
back to normal mode automatically. In V-NET, the office mode is not limited by time, i.e. a locking
device remains coupled until the office mode is deactivated by the locking media again.
Page 86 of 141 Long shield ILS
6.2 Using the Office function
Overview: Master media usage Help & troubleshooting Technical data Maintenance & disposal
Operation
Administration Assembly Basics
To Next Page
Loading...
