Example: You can activate the office mode from Monday to Friday from 8 to 17 Hrs. If the office
function is activated, it automatically reverts back to its normal mode at 17 Hrs. that is,
authorised locking media must be used to open the door.
6.2.1 Activating the office mode
Required devices and locking media:
l Locking media, which is authorised for the office function
l Locking device, which is authorised for the office function
Procedure:
1. Hold the locking media authorised for the office function for ca 2 seconds in the reading
field of the locking device.
As soon as the locking media is in the reading field, the following signal appears:
1x short green
After ca 2 second, another signal appears:
1x short green , 1x long green
The office mode is now active. The door can now be opened until the end of the office hours
without locking media. LINE locking device reconnects automatically at the end-time set in the
OMEGA Client.
Since there are no start and end-times for the Office function in the V-NET, there is no
end-time at which the locking device automatically reconnects. Therefore, the office mode
in V-NET must be deactivated with an authorised locking media.
Troubleshooting:
Problem/Signalling Reason Solution
No signal after ca 2 seconds. The
office mode is not active. The
coupling of the locking device
engages, but disengages again
after expiry of the opening
duration.
The locking device is not authorised
for the office function.
Have the locking device
authorised for the office function
by the system administrator.
The office function is not available at
this time.
Enquire with the system
administrator, when the office
function in this locking device can
Long shield ILS Page 87 of 141
6.2 Using the Office function
Overview: Master media usage Help & troubleshooting Technical data Maintenance & disposal
Operation
Administration Assembly Basics
To Next Page
Loading...
