Problem/Signalling Reason Solution
be activated.
The locking media is not authorised
for the office function.
Have the locking media
authorised for the office function
by the system administrator.
6.2.2 Deactivating the office mode
Required devices and locking media:
l Locking media, which is authorised for the office function
l Locking device, which is authorised for the office function
Procedure:
1. Hold the locking media authorised for the office function for ca 2 seconds in the reading
field of the locking device.
As soon as the locking media is in the reading field, the following signal appears:
1x long green
After ca 2 second, another signal appears:
1x long green , 1x short green
The office mode is now deactivated. The door can be opened now only with authorised locking
media.
Troubleshooting:
Signalling Reason Solution
After 2 seconds
not shown.
The office mode cannot be deactivated
because the locking media is not
authorised for the office function.
Have your locking media authorised for
the office function by the system
administrator.
Page 88 of 141 Long shield ILS
6.2 Using the Office function
Overview: Master media usage Help & troubleshooting Technical data Maintenance & disposal
Operation
Administration Assembly Basics
To Next Page
Loading...
