11.4 Deleting System-Master
Deletion of System-Master serves to restore the security of OMEGA FLEX system and is not
necessary under normal use, see also "Help and troubleshooting" on page101.
Effects of deletion of System-Master
l Deletion of the System-Master results in deletion of all master media and locking author-
isations from a locking device.
l All settings in the locking device, which were made with the OMEGA Client software (e.g.
Time profiles, locking media authorisations etc.), remain intact after deletion of the Sys-
tem-Master.
l Deletion of the System-Master deactivates all active opening modes of a locking device.
Online devices remain in online mode though.
l The opening period set with the Time-Master remains intact after deletion of the Time-
Master.
Required master media:
l System-Master
Procedure:
1. Hold the System-Master for ca. 5 seconds in the reading field of the locking device.
The following signal appears:
2x short green
2. Remove the System-Master from the reading field of the locking device.
It is automatically ensured that no access is possible in that if the coupling of the locking device
was engaged, disengages.
The System-Master is now deleted from this locking device.
Long shield ILS Page115 of 141
11.4 Deleting System-Master
Overview: Master media usage
Help & troubleshooting
Technical data
Maintenance & disposal Operation Administration Assembly Basics
To Next Page
Loading...
