19. Pull the FIXTURE RING hand-tight WITH THE CES ring
spanner (max. 1.2 Nm).
Do not over-tighten the fixture ring with too much
force! Otherwise you may damage the handle set.
20. Check whether the fitting operates friction-free with
the lock and locking cylinder.
Assembly of the handle set is now complete.
Page 60 of 141 Long shield ILS
4.7 Assembling wide shield (for rosette-holes)
Overview: Master media usage
Help & troubleshooting Technical data
Maintenance & disposal
Operation Administration
Assembly
Basics
To Next Page
Loading...
