16. Guide the SUPPORT FRAME over the INSIDE LEVER HANDLE up
to the ASSEMBLY PLATE.
17. Guide the INSIDE SHIELD over the INSIDE LEVER HANDLE and
push it up to the ASSEMBLY PLATE.
Make sure thereby that the cables are not pinched
or jammed.
18. Guide the FIXTURE RING over the inside INSIDE LEVER
HANDLE and push it up to the end of the inside lever
handle.
Long shield ILS Page 59 of 141
4.7 Assembling wide shield (for rosette-holes)
Overview: Master media usage
Help & troubleshooting Technical data Maintenance & disposal Operation Administration
Assembly
Basics
To Next Page
Loading...
