System error
If system errors are present, they are signalled after to the following actions:
l after reading the authorised locking media
l after attempting to put handle set in release mode or emergency mode
l after the start sequence (insertion/connecting the batteries)
Signalling Reason Solution
System error: Communication with the
actuator is not possible.
Check the wiring and contacts.
If you cannot fix the error by yourself,
contact your CES partner.
System error: The actuator of the locking
device is malfunctioning.
Check if the actuator has jammed.
If you cannot fix the error by yourself,
contact your CES partner.
System error: Communication could be
established but was not successful.
In the case of electronic cylinders,
check whether the knob and the
blocking mechanism have the same
UID or system identification.
If you cannot fix the error by yourself,
contact your CES partner.
Long shield ILS Page 107 of 141
10.3 Error signalling
Overview: Master media usage
Help & troubleshooting
Technical data
Maintenance & disposal Operation Administration Assembly Basics
To Next Page
Loading...
