OPERATING YOUR VEHICLE
96
Shallow Water Crossing
Water can be a unique hazard. If it is too deep the vehicle may “float” and topple. Check the water
depth and current before you attempt to cross any water. Water depth should not exceed 60 cm to
safely cross the obstacle.
Beware of slippery surfaces such as rocks, grass, logs, etc., both in the water and on its banks. A
loss of traction may occur. Do not attempt to enter the water at high speed. Water will affect the
braking ability of your vehicle. Make sure you dry the brakes by applying them several times while
driving slowly after the vehicle leaves the water.
What to do if vehicle is submerged
If the vehicle becomes immersed, it will be necessary to have it transported to your dealer as
soon as possible. Do not attempt to re-start the engine, as water may have been ingested into
the cylinders, which can cause internal damage.
Riding in Mud, Ice or Snow
When performing a pre-ride inspection, pay special attention to locations on the vehicle where mud,
ice and/or snow accumulations may obstruct visibility of the tail lamps, clog ventilation openings,
block the radiator and fan, and interfere with the movement of controls. Before starting with your
vehicle, check the steering, throttle and brake pedals for interference-free operation.
Whenever this vehicle is driven on a snow or ice covered path, the tire grip is generally reduced,
causing the vehicle to react differently to control inputs from the operator.
To Next Page
Loading...