OPERATING YOUR VEHICLE
86
Shifting: to Park
1. Verify the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake and press the gear selector button.
3. Shift to ‘P’ by moving the gear selector along the shift guide. Shake the vehicle forward and
backward to verify that parking is engaged.
NOTE:
The gear selector cannot be shifted into reverse gear without pressing the shift button.
The gear shift indicators should display corresponding to the actual gear position, if the indicator
does not display, ask your dealer to inspect the vehicle electrical circuit or adjust the gear shifting
system.
Due to the synchronizing mechanism in the engine, an indicator may not display until the vehicle
starts moving.
Do not use high gear for continuous slow speed travel or towing, as this can lead to excessive
heating of the clutch system, which may damage components.
To Next Page
Loading...