MAINTENANCE
137
Spark plug removal to expel water from the engine
If water has been ingested into the engine, it is important to remove the water as soon as possible
by removing the spark plug(s) and using the starter system to rotate the engine for a short period to
expel water out of the cylinder(s). Verify that the air box has been drained of water before attempting
to expel water. Have a dealer service the engine immediately.
Major engine damage can result if the vehicle if water is ingested into the engine. Have the vehicle
serviced by your dealer promptly if your vehicle becomes immersed or stalls in water that exceeds
the footrest level. It is important to contact your dealer for service before starting the engine if water
has been ingested. Water inside the engine can cause a ‘hydraulic lock’ effect that can damage the
starter and engine components. The engine oil should be checked for water contamination. Drain
and refill with new engine oil if water is found in the crankcase.
To Next Page
Loading...