CONTROLS AND FEATURES
76
Indicators and Warnings
① - Hand brake ‘ON’. Illuminates when the hand brake lever is pulled.
② - High Beam ‘ON’. Illuminates when the headlight switch is in this position.
③ - ‘L’= Low Gear Position. This indicator displays when the transmission is in Low.
④ - ‘H’= High Gear Position; This indicator displays when the transmission is in High.
⑤ - ‘N’= Neutral Position; This indicator displays when the transmission is in Neutral.
⑥ - ‘R’= Reverse Position; This indicator displays when the transmission is in Reverse.
⑦ - ‘P’= Parking Position; This indicator displays when the transmission is in Park.
⑧ - EFI Fault. This indicator light flashes when a fault occurs in the Electronic Fuel Injection system.
⑨ - Speed Limit Override ‘ON’. This indicator light comes on when pressing the override switch.
Always exercise caution when using the override button.
⑩ - Tail Light ‘ON’. This indicator displays when the main headlight switch is set to this position.
⑪ - 4WD Indicator. This dashboard section corresponds to the drive method chosen. The front
differential gear case contains the synchronizing component that signals the display.
⑫ - Fuel Gauge. This dashboard section displays the current gas remaining in the tank. ‘F’ indicates
full. ‘E’ indicates stand-by fuel. When the indicator enters the red area, the fuel remaining is
approximately 3.5L (.92 gal). Fuel must be added as soon as possible.
To Next Page
Loading...