CONTROLS AND FEATURES
77
⑬ - EFI Fault. This indicator light displays when a fault occurs in the Electronic Fuel Injection
system.
⑭ - Clock. This dashboard section can be adjusted to the correct time using the right ‘ADJ’ button
below the dashboard.
⑮ - Speedometer. This dashboard section can be toggled to display the vehicle speed in Kilometers
per hour (Km/h) or Miles Per Hour (MPH).
⑯ - Engine Temperature. This dashboard section displays the current coolant temperature, ‘C’ is
low temperature, ‘H’ is high temperature. Both over-low and over-high are abnormal. Idle the
vehicle to warm the engine when it's too cold, and park the vehicle when it's too hot to prevent
the coolant from boiling. Keep the coolant temperature in a normal range.
⑰ - Oil Change Reminder. This indicator displays when the pre-programmed time limit has been
reached for oil change service.
⑱ - Seatbelt Reminder. This indicator displays when the seat belt is not fastened.
⑲ - Odometer / Trip/ Rpm / Volt. This dashboard section can be toggled using the left ‘SEL’ button
to display the accumulated distance traveled in miles/kilometers; ‘ODO’ -The accumulated
vehicle distance traveled, ‘TRIP’ - The trip distance traveled, ‘RPM’ - The engine speed in
Revolutions Per Minute (RPM), ‘V’ - Battery voltage.
⑳ - EPS Fault. This indicator light flashes when a fault occurs in the Electronic Power Steering
system.
*Select countries (markets) are equipped with turn signals and indicators as standard equipment.
To Next Page
Loading...