OPERATING YOUR VEHICLE
85
Shifting: High Gear to Low Gear
1. Verify the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake.
3. Shift to ‘L’ by moving the gear selector along the shift guide.
Shifting: Low Gear to High Gear
1. Verify the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake.
3. Shift to ‘H’ by moving the gear selector along the shift guide.
Shifting: to Reverse Gear
1. Verify the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake and press the gear selector button.
3. Shift to ‘R’ by moving the gear selector along the shift guide.
4. Check behind you for people or obstacles, then release the rear brake pedal.
5. Apply the throttle lever gradually and continue to watch behind you while moving backward.
Before shifting into reverse, make sure there are no obstacles or people, and the area is safe
behind you. When it is safe to proceed, go slowly.
Avoid excessive throttle operation while in speed limit mode, as it may cause fuel to build in the
exhaust, resulting in engine popping and/or engine damage.
To Next Page
Loading...