EasyManua.ls Logo

CFMoto Uforce 500 - Shifting the Transmission

Default Icon
182 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATING YOUR VEHICLE
84
Shifting the Transmission
NOTE:
Low gear is the preferred transmission gear selection for all forward motion other than prolonged
high speed travel.
Shifting out of Park
1. Verify the throttle is closed.
2. Apply the foot brake and press the gear selector button.
3. Shift to the desired gear by moving the gear selector along the shift guide.
Shifting: Neutral to High Gear
1. Verify the throttle is closed and the vehicle is stopped completely.
2. Apply the foot brake.
3. Shift to ‘H’ by moving the gear selector along the shift guide.
CAUTION
Allow the engine to warm up for a short period before operating the vehicle. Operating the vehicle
immediately after starting could cause engine damage.
CAUTION
To avoid transmission damage, return the throttle to the closed position, stop the vehicle, and apply
the foot brake before shifting.

Table of Contents

Related product manuals