EasyManua.ls Logo

CFMoto Uforce 500 - Wheels; Tire pressure; Tread depth; Wheel Bearings

Default Icon
182 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
146
Wheels
Tire pressure
Inspect the tire pressure before operation:
Front: 10.1 psi (70kPa)
Rear: 14.5 psi (100kPa)
Tread depth
Inspect the tread depth regularly and replace the tires if
the minimum tread depth is less than:
Minimum tread depth: 3/32 in. (3.0mm)
Wheel Bearings
1. Lift the vehicle and support it securely under the
frame with the tires off the ground.
2. Push and pull the wheels at the outer edges to feel for side play or looseness. See your
dealer if there is any side play or looseness.

Table of Contents

Related product manuals