MAINTENANCE
138
Exhaust spark arrestor
Clean carbon deposits from the spark arrester periodically while the muffler and exhaust are at
normal air temperature.
1. Remove the fasteners ①.
2. Tap the tailpipe lightly to loosen it and remove the
spark arrester ② from the muffler.
3. Use a wire brush to remove any carbon deposits
from the spark arrester portion of the tailpipe ③.
4. Insert the tailpipe into the muffler and align the
bolt holes.
5. Install and torque the fasteners to 7.3 ft-lb. (10
Nm).
To Next Page
Loading...