CFMoto Uforce 500 - Page 113

MAINTENANCE
109
Item
Maintenance Schedule Key - See page 107
Calendar-based Maintenance Interval
(service whichever interval comes first)
CALENDAR
Miles (Km)
Remarks

Air box sediment
tube
Pre-Ride
Drain and clean housing if deposits are visible
CVT inlet / outlet
pipe and sediment
tube
Pre-Ride
Drain and clean housing if deposits are
visible. Check often if operating in wet
conditions.

Air inlet / Air filter
Inspect and replace more often under
severe use conditions.

Coolant
Pre-Ride
932 (1500)
Inspect reservoir level daily; Initial check at
250km; Change coolant every 2 years/ 6000km
Head light / Tail light
Pre-Ride
Check operation
Engine oil and filter
change (Break-in)
155 (250)
Break-in oil change: 750km

Engine valve
clearance
155 (250)
Adjust intake and exhaust valve clearance
after 750 km break-in period