6. To verify that the Emergency Firmware Update was effective, navigate to the L1_SETUP>>FACTORY_SETTING menu
and select the FIRMWARE_VERSION item. Check that the displayed firmware version matches the version of the
firmware update files used for the Emergency Firmware Update procedure.
Note: The Emergency Firmware Update process lasts several minutes, do NOT interrupt it!
If the Emergency Software Update procedure failed, try to download the latest software images from www.ch-precision.com and
rerun the Emergency Software Update procedure (don't forget to prepare the software update files and USB stick accordingly). If
the failure persists, contact your authorized dealer for assistance.
44 L1 User Manual Rev 1.0
To Next Page
Loading...
