Chamberlain WD962KPEV User Manual

39
Your remote control has been programmed at the factory to operate with your garage door opener.
Older Chamberlain remote controlsare NOTcompatible,see page 47 for compatible accessories. Programming can be done through the door control or the learn button the garage door opener. To
program additional accessories refer to the instructions provided with the accessoryor visitwww.chamberlain.com. If your vehicle is equipped with a Homelink
®
, you may require an external adapter
depending on the make, model, and year ofyour vehicle.Visitwww.homelink.com for additional information.
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN USING THE MOTION-DETECTING CONTROL PANEL
1 Pressthe LEARNbutton on the
door control to enter
Programming Mode.
The command LED
will flash once.
2 Pressthe LEARNbutton
again, the LEDwill flash
once.
The command LED will
flash once again.
3 Remote Control:
Press the button on the remote control thatyou wish to operate your garage
door.
Keyless Entry:
Enter a 4-digit personal identification number (PIN) ofyour choice on the
keyless entry keypad. Then pressthe ENTERbutton.
The garage door opener lights will flash (or two clickswill be heard) when the
code hasbeen programmed. Repeatthe steps for programming additional
remote controls or keylessentry devices.
OR
PIN
? ? ? ?
1
2
A
BC
3
DEF
4
GHI
5
JKL
6
MNO
7
P
RS
8
TUV
9
WXY
0
QZ
*
#
E
NT
E
R
0 QZ
*
#
ENTER
TO ADD, REPROGRAM, OR CHANGE A REMOTE CONTROL/KEYLESS ENTRY PIN USING THE SMARTCONTROLPANEL
1 Pressthe navigation button
below "MENU" to view the
Features menu.
2 Use the navigation buttons
to scroll to "PROGRAM".
Press to continue.
3 Select"REMOTE"or
"KEYPAD" to program from
the program menu.
TO REMOTE
Press to continue.
4 Remote Control:
Press the button on the remote control thatyou wish to operate your
garage door.
Keyless Entry:
Enter a 4-digit personal identification number (PIN) ofyour choice on
the keyless entry keypad. Then press the ENTERbutton.
OR
The garage door opener lights will flash (or two clickswill be heard) when
the code hasbeen programmed.
Repeat the steps for programming additional remote controls or keyless
entry devices. Ifprogramming is unsuccessful, programthe remote using
the learn button.
PIN
? ? ? ?
1
2
A
BC
3
DEF
4
GHI
5
JKL
6
MNO
7
P
RS
8
TUV
9
WXY
0
QZ
*
#
E
NT
E
R
0 QZ
*
#
ENTER
Remote Control

Chamberlain WD962KPEV Specifications

General

Brand	Chamberlain
Model	WD962KPEV
Category	Garage Door Opener
Language	English