DF II Series User Manual 15
CHANGING UNITS
The DF II Series gauge has a dedicated UNITS
key for changing units of measure.
DF II Series gauges with a capacity of 110 lbf
(500N) and below can display results in the follow-
ing units: ozf, gf, lbf, kgf and N.
DF II Series with capacities greater than 110 lbf
(500N) can display results in lbf, kgf and N.
DFS II-R-ND gauges with the STS Series torque
sensor can display torque in the following units:
N-cm, cm-kg, oz-in, lb-in, N-m.
ozf (ounces force)
gf (grams force)
lbf (pounds force)
kgf (kilograms force)
N (newtons)
Units
Home
Zero
Enter
i
}
The ozf and gf units are available on DF II Series
gauges with capacities of 100 lbf and below.
These units are not available on 200 lbf or higher
capacities.
UNITS LOCK
You may “lock” the units of measured on your DF II
Series gauges. This disables the UNITS key.
To enable the UNITS LOCK feature, from HOME,
select the F3 (More) key to get to the SETUP
function. From Home, depress the F3 key four
times.
Select Units Lock. Select ENTER. Use the F1 key
to turn the feature ON/OFF.
A “Lock Icon” appears at the top of the screen when
the Units Lock feature is ON. A message prompt
also alerts the operator.
To Next Page
Loading...
Need help?
General
