CHINT NVF5 Series User Manual

NVF5 Series User Manual Chapter 4 Integral Keypad
When parameter F7.00 set to non-zero value(Password)， exit parameter edit
status,the password is effective，and the keypad displays P.SET，press PRG/S key again，
the keypad displays“0000”，users should input correct password then enter into the
parameter edit status.After setting the user password correctly,if there is no keypad
operation in 1 minute,the inverter will be locked again. If the password is cleared，the
keypad displays P.CLr（If users forget the setting password,you can ask for Chint technical
support for getting help）
F7.00 User Password
0000：No Password
Others：Passwrod
- 33 -

CHINT NVF5 Series Specifications

General

Brand	CHINT
Model	NVF5 Series
Category	Inverter
Language	English