CHINT NVF5 Series User Manual

NVF5 Series User Manual Chapter 6 Parameter Function Description
Output Freq.
Time
Y
Time
FDT1
Level
FDT1
Lag
Figure 6-17-1 Frequency Detection
6.18 Output Current Zero Point Detection
For setting Zero point detection value of output current.
Code Name Default Setting Range Description
F8.20
Zero point detection
value of output
current
5.0%
（ 0.0 ～ 300.0）%
-
F8.21
Detection Delay
Time
0.10s
（0.00 ～ 600.00）s
-
Figure 6-18-1 Output Current Zero Point Detection Diagram
6.19 Running Timer
When inverter start, timer run from 0，See Fd.49 to check timer remaining time .
Code Name Default Setting Range Description
F8.32
Timer Function
Selection
0
0 ～ 1
0：Ineffective
1：Effective
- 89 -

CHINT NVF5 Series Specifications

General

Brand	CHINT
Model	NVF5 Series
Category	Inverter
Language	English